Small 4’’x3’’x18’’ Spawn bag with Injection Port

$ 3.37

1
2
3
4
5
6
7
8
9
10 +

Quantity

Description

Type: 4T-INJ
Bag Size: 4" X 3" X 18"
Filter Size: 1.5" X 1.5"
Filter Pore Size: 0.2 Microns
Material: 3.0 Mil Polypropylene
Injection Port: Yes

Spawn / Myco grow bags are used for mushroom cultivation. These bags are made of durable 3 mil polypropylene. They measure 4 x 3 x 18 inches, have a self healing injection port for easy inoculation and a 1.5 x 1.5 inch 0.2 micron filter which allows for the passage of air but not unwanted contaminates. They can be used in a pressure cooker, steam sterilizer or autoclave.

Myco grow bags can be used for spawn production to inoculate bulk substrates like straw or compost. The breathable technology behind the myco grow bags provides gas exchange, but excludes water vapor, so your spawn does not dehydrate and you can fruit your substrate right inside the bag itself.

These side-gusseted bags give a sturdy stand-up bag after filling and a strong bottom seal. They are reusable, can be sealed with an impulse sealer, taped or tied shut at the ends. Each bag can easily hold 2-3 pounds of substrate. Myco grow bags are a superior and economical choice when it comes to growing mushrooms. Other sizes, filters and quantities are also available.

Volume

These are rough amounts and are the amounts of the substrates in their loosened uncompressed form. Our compost is compressed in blocks for easier shipping but should be uncompressed and aerated before inoculating with grain spawn.

Grain

One pound bags are approximately 2.5” high x 4.5” wide x 4” deep 24 FL oz. in volume, equal to 3-4 ½ pint jars
Two pound bags are approximately 5” high x 4.5” wide x 4” deep 48 FL oz. in volume, equal to 6-8 ½ pint jars

Compost

10 pounds = 9 quarts
5 pounds = 4.5 quarts

Kits = 7.5’' high x 6'' wide x 4'' deep, which is 180 cubic inches, or 3.17 quarts.

Bag Size

Grain (one and two pounds) is bagged in 4x3x18 gusseted myco bags made from 3 mil polypropylene.
Compost / bulk substrate (five and ten pounds) is bagged in 10x5x24 gusseted myco bags made from 3 mil polypropylene.
Kits are bagged in 5x4x18 gusseted myco bags made from 3 mil polypropylene.

Quick Links To Instructions

Fast Shipping

2-5 Day Delivery

We ship exclusively with UPS and USPS for the best Flat Rate Shipping available. Please let us know if there is any issues with shipping by contacting us here

Small 4’’x3’’x18’’ Spawn bag with Injection Port

$ 3.37

FAQs

Q: I want to fruit in a terrarium/tub. What size tote do I need?

A:We have found that most people use anywhere from a 20-50 quart tote However, this will depend on the measurements of the tote. Are you are breaking the kit up or leaving it as one solid cake? If breaking it up, you need to decide how thick you want your substrate layer to be. 2-3 inches is pretty standard. If you measure the length, width and height of the tote you will find out how may cubic inches it is. Then measure the length and width and depth you want your substrate layer to be. Our 5 LB kits measure 7.5'' high x 6'' wide x 4'' deep which is 180 cubic inches, or 3.17 quarts. From this you can determine what size tote you will need.

Q: Can I use spores to colonize compost?

A:Our compost works best when inoculated with colonized grain spawn. If you just inject this bag with spores you will more than likely not see any growth. Spores need some kind of nutritive substance like grain to take ahold of and establish mycelium growth first. Start by injecting your spores or liquid culture into a sterilized grain medium (we have this for sale in our store), then once the grain is colonized you can transfer it to the compost, then once the compost is colonized the mushrooms will grow right out of the bag or you can transfer them to some kind of fruiting chamber, tote or terrarium.

Q: My substrate is packed tight, do I need to loosen it?

A:Yes, we ship it in that way for two reasons. First, we have less bags burst in shipping when tightly packed and shrink wrapped. Second, having the least amount of air in each bag before we seal then ensures they are able to be stored if necessary. Before using any shipped substrate, allow a day or two for it to reach room temperature and loosen the material in the bags before inoculation. This allows more air flow durning your grow.

Q: How are your bags of grain able to last that long?

A:This is all made possible because of sterilization.The grain is stored in sealed bags with almost all oxygen removed. Therefor they are kept in almost a suspended like state (think of food stored in a food saver bag). They key is the oxygen. Molds and bacterias that break down the grain and cause contaminates need air to live. Without it they will not grow. When you remove the bags of grain from their packaging, unroll them and expose the filter patch, the bag will begin to let in outside air and breath through this filter. This is what allows a desired culture to grow once introduced to the substrate.

Shipping